- Contact Person : Mr. Lee Qiueen
- Company Name : Dongguan City Lang Jun Hardware Electronics Co., Ltd.
- Tel : 86-769-86064988-2802
- Fax : 86-769-86064958
- Address : Guangdong,Dongguan,No.74 ZhongNanBei Road, Shangsha Village, Chang'an Town,Dongguan,Guangdong
- Country/Region : China
- Zip : 523857
Direct Attach Cables 1 Meter SFP+ cable Tyco 2032237-2
Related Product Searches:Direct Attach Cables 1 Meter SFP+ cable Tyco 2032237-2,High Quality,SFP cable, SFP cable,Direct Attach Cables 1 Meter SFP+ cable Tyco 2032237-2
1. Scope
ContentThis specification is designated the Performance, Tests and quality requirements for 0.8mm centerline(pitch)printed circuit board(PCB)Connector
Design and ConstructionProduct shall be conformed the Design, Construction and Physical dimensions shown as product drawing
2. Material
ConnectorContact :Copper alloy , Selective gold plated on contact area and gold plated on solder tail , Nickel underplate
Housing:High Temperature Thermoplastic, UL94V-0 rated
Shell:C5191R-H and Nickel plated or SUS
3. Current Rating:0.5A per contact minimumVoltage Rating:30V AC(RMS)/DC Max
Operating temperature:-40°C ~ +85°C
4.Test description
ITEM | REQUIREMENT | PROCEDURE | |
1 | Visual Inspection | The inspection results should be compliant with the individual specification | Before the qualification test,all thesecomponents shall be examined theFeatures, Construction as per applicable specification and documents |
2 | Contact Resistance | Contact:30 mΩ maximum Shell:50 mΩ maximum | Mate connectors:Measure by dry circuit,20mV maximum, 10mA |
3 | Insulation ResistanceMEGO | 100Mohms minimum | Unmated &unmount connector, apply500 volts(RMS.) between adjacentterminals or ground |
4 | Dielectric Withstanding | No breakdown;Current leakage 5mA | Unmated &unmount connector, apply avoltage of 500 VoltsAC for 1 minutebetween adjacent terminals and betweenterminals to ground |
5 | Electrostatic Discharge | No evidence of Discharge to Contacts at 8k Volts | Test numated each connectors from 1K Volt to 8kVolts in 1kVolt steps using 8mm ball probe |
6 | Temperature Rise | Mate connectors: measure the temperature rise at the rated current after 96hours(45 minutes ON and 15minutes OFF per hour)Testing as required | Temperature rise:+30°C MAXIMUM |
7 | Insertion Force & WithdrawalForce | Withdrawal Force 17N(1.73kgf).MIN Insertion force 85N(8.67kgf).MIN | The specimen is mounted to mounting fixtures by the normal mounting means. The peak force shall be recorded at the maximum rate of 25±3mm per minute |
8 | Terminal Retention Force | Axial pullout force on the terminal in the housing at a rate of 25mm per minute | 4.5N MINIMUM retention force |
9 | Durability | ContactResistance | Measure connectors up to 250 cycle at a maximum rate of 10 cycles per minute. |
10 | Vibration | 10 milliohms MAXIMUM (change from initial)&Discontinuity 1microsecond | Mate connectors and vibrate |
11 | Shock (Thermal) | 10 milliohms MAXIMUM (change from initial) | 10 cycles with the exception of exposure times |
12 | Thermal aging | 10 milliohms MAXIMUM(change from initial) | Mate connector: expose to 456 hours at 90°±2°C. |
13 | Humidity | 10 milliohms MAXIMUM(change from initial) | Cycle connectors between25°±3°C at 80%RH and 65°±3°C |
14 | Solderability | Solder Coverage:95%(min) | Per SMES-152 |
15 | Salt Spray | The connector specimen are testing with 5% Salt Water(Nacl),6.5-7.2PH,for 48 hours of Salt Spray test. | After the salt spray test,The connectorsshall meet the requirements of connectresistance and insulation resistanceetc. |
5.photos and drawings
Direct Attach Cables 1 Meter SFP+ cable Tyco 2032237-2