Dongguan City Lang Jun Hardware Electronics Co., Ltd.
Main products:connector,hdmi,USB cable
Products
Contact Us
  • Contact Person : Mr. Lee Qiueen
  • Company Name : Dongguan City Lang Jun Hardware Electronics Co., Ltd.
  • Tel : 86-769-86064988-2802
  • Fax : 86-769-86064958
  • Address : Guangdong,Dongguan,No.74 ZhongNanBei Road, Shangsha Village, Chang'an Town,Dongguan,Guangdong
  • Country/Region : China
  • Zip : 523857

displayport connector

displayport connector
Product Detailed
HDMI connector 1.type:HDMI connector male fan type 2.standard:Rohs,Reach 3.connector material:copper 4.connector support 3D

1.HDMI connector male fan type scope:

a.Content

This specification is designated the Performance, Tests and quality requirements for High-Definition Multimedia Interface(HDMI) serial Connector.Used High-Definition Multimedia Interface(HDMI) connector.

b.Design and Construction                                

Product shall be conformed the Design, Construction and Physical dimensions.Shown as product drawing.

2.HDMI connector male fan type material

Connector

Contact :Copper Alloy ,Selective Gold Plating over Nickel in Contact Area and Tin/Lead over Nickel at Soldering Area.

Terminal :Copper

Housing Hign Temperature Thermoplastic,UL94V-0 rated.

BodyUL94V-0 rated.

Shell:Copper Alloy or SPCC ,Solderable Nickel plating or Gold plating

3.HDMI connector male fan type

Ratings

Current Rating:0.5A DC Max.

Rated current:0.5A

Voltage Rating:40V AC/DC(RMS)

Rated voltage:AC/DC 40V

Operating temperature :-25°C ~ +85°C

Working temperature:-25°C ~ +85°C

4.HDMI connector male fan type scope examination of product

ITEM 

TEST DESCRIPTION 

REQUIREMENT 

PROCEDURE 

 

Visual Inspection

Refer to

ANSI/EIA-364-18

The inspection results should be compliant with the individual specification.

Before the qualification test, all these components shall be examined the Features, Construction as per applicable specification and documents.

5.HDMI connector male fan type electrical performance

ITEM 

TEST DESCRIPTION 

REQUIREMENT 

PROCEDURE 

5-1

Low Level Contact Resistance(Contact):

PIN):Refer to: ANSI/EIA-364-23

50 milliohms max.

Mate connectors:

Measure by dry circuit,

20mV maximum, 10mA maximum.

5-2

Low Level Contact Resistance(Shell):

Refer t

ANSI/EIA-364-23

 50 milliohms max.

Mate connectors:

Measure by open circuit,

5V maximum, 100mA maximum.

5-3

Insulation Resistance

Refer to

ANSI/EIA-364-21

Method 302 cond. B

100 Mega ohms minimum(unmated)

10 Mega ohms minimum(mated)

Mated connectors, Apply 150Volts DC between adjacent terminal.(500Volts for unmated)

5-4

Dielectric Withstanding Voltage

Refer to

ANSI/EIA-364-20

Method 301

No breakdown.

Unmated connector, apply 500VoltsAC(RMS.) for 1minute between adjacent terminal.

6.HDMI connector male fan type mechanical performance

ITEM 

TEST DESCRIPTION 

REQUIREMENT 

PROCEDURE 

6-1

Terminal/Housing retention force

0.40kgf/Pin Min.

0.40kgf

Measure the contact retention

6-2

Insertion Force & Withdrawal Force

Refer to

ANSI/EIA-364-13

Insertion Force:4.50kgf Max.

Withdrawal Force:1.00kgf Min.

The specimen is mounted to mounting fixtures by the normal mounting means.The peak force shall be recorded at the maximum rate of 25mm per minute

6-3

Durability

Refer to

ANSI/EIA – 364 – 09

After 10000 cycles test, shall be no

evidence of mechanical or ecectric

defects, and shall meet the

requirements of connector using.

10000 insertion/extraction cycles at a maximum rate of 100±50 cycles per hour.s.

7.HDMI connector  photos and drawings

displayport connector



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.