Dongguan City Lang Jun Hardware Electronics Co., Ltd.
Main products:connector,hdmi,USB cable
Products
Contact Us
  • Contact Person : Mr. Lee Qiueen
  • Company Name : Dongguan City Lang Jun Hardware Electronics Co., Ltd.
  • Tel : 86-769-86064988-2802
  • Fax : 86-769-86064958
  • Address : Guangdong,Dongguan,No.74 ZhongNanBei Road, Shangsha Village, Chang'an Town,Dongguan,Guangdong
  • Country/Region : China
  • Zip : 523857

high quality DVI 24+5 female dip double type connector adapter

high quality DVI 24+5 female dip double type connector adapter
Product Detailed
1.type:DVI dip typeconnector 2.product approved:UL,CE,ROHS 3.dvi to vga molding type 4.application:computer

1. Scope1.1 ContentThis specification is designated the Performance, Tests and quality requirements for DVI MALE(Soldering Type) Connector

1.2 Design and ConstructionProduct shall be conformed the Design, Construction and Physical dimensionsShown as product drawing

2. Material

2.1 Connector

 Contact     Brass , Gold Plating over Nickel in Contact Area and Tin/Lead over Nickel at Soldering Area.

 Housing    PBT, UL94V-0 rated

  Shell         SPCC, T=0.40MM

3. Ratings

Current Rating    1.5A per contact MIN.

Voltage Rating     40V AC/DC(RMS)

Operating temperature   -25 to 85°C

4. Examination of product

ITEM TEST DESCRIPTION REQUIREMENT PROCEDURE
 1 Visual Inspection The inspection results should becompliant with the individualspecification. Before the qualification test, all these componentsshall be examined the Features, Construction as per applicable specification and documents.

5. Electrical performance

ITEM TEST DESCRIPTION REQUIREMENTPROCEDURE 
5.1 Contact Contact:20 milliohms maximuminitial 30 milliohmsmaximum change from original Mate connectors:Measure by dry circuit,20mV maximum, 10mA.
5.2 Insulation Resistance 1000 Mega ohms minimum Mated connectors, Apply 500Volts DC betweenadjacent terminal.
5.3 Dielectric Withstanding No breakdown Unmated connector, apply 500VoltsAC(RMS.) for1minute between adjacent terminal

6. Mechanical performance

ITEM TEST DESCRIPTION REQUIREMENT PROCEDURE
6.1 Terminal/Housingretention force Digital Contacts: 1.9kgf Min.Analog Contacts: 1.5kgf Min.Ground Blades: 3.9kgf Min. Measure the contact retention
6.2 Insertion Force &Withdrawal Force

 Withdrawal force:(1kgf) min. (4kgf) max.

Insertion force: (4.5kgf) max

 The specimen is mounted to mounting fixtures bythe normal mounting means.The peak force shall berecorded at the maximum rate of 25mm per minute
6.3  DurabilityContact: 30 milliohm max After 100 cycles test, shall be noevidence of mechanical or ecectricdefects, and shall meet therequirements of connector using Mate and unmate the connectors and the Female for100 cycles of 100 cycles per hours

7. Environmental performance and others

ITEM TEST DESCRIPTION REQUIREMENT PROCEDURE
7.1  Humidity

 Appearance: No damage

Contact: 30 milliohm max

Insulation Resistance: 500Megaohms minimum

 Mate connectors together and perform the test asfollows.

Temperature: 25 to 85

Relative Humidity: 80 to 95%Duration: 96 hoursUpon completion of the test, specimens shall beconditioned at ambient room conditions for 250 hours,after which the specified measurements shall beperformed.

7.2 Thermal Aging

 Appearance: No damage

Contact: 30milliohm max

 Mate connectors and expose to105±2 

°C for 250 hours. Upon completion of theexposure period, the test specimens shall beconditioned at ambient room conditions for 1 to 2hours, after which the specified measurements shall beperformed.

7.3 Solder ability The tail of contact is covered bycontinuous new solder. and thearea of “Voids Solder” cannotexceed 5% of total area

 Immersed the contact of connector into themolten-Tin oven as below condition,Temp of Tin Oven: 245 °CSpeed: 25.4mm/sec

Time: 5 seconds

7.4 Thermal Shock

 Appearance: No damage

Contact: 30milliohm max

 Mate connectors and subject to the followingconditions for 10 cycles. Upon completion of theexposure period, the test specimens shall beconditioned at ambient room conditions for 1 to 2hours, after which the specified meaurements shall beperformed.1 cycle:-25±3°C for 30 minutes

 +85±3°C for 30 minutes

7.5 Resistance to SolderingHeat Appearance: No damage Leave the connector with Female in the 260±5 

°C

Cchamber for 5 sec..
7.6 Salt Spray Appearance: No corrosion

 The connector specimen are testing with the 5% saltwater (NaC1) 6.5-7.2PH,Temperature:35±2

°Cfor 48Hours test

 8.dvi connector adapter photos

high quality DVI 24+5 female dip double type connector adapter



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.