Dongguan City Lang Jun Hardware Electronics Co., Ltd.
Main products:connector,hdmi,USB cable
Products
Contact Us
  • Contact Person : Mr. Lee Qiueen
  • Company Name : Dongguan City Lang Jun Hardware Electronics Co., Ltd.
  • Tel : 86-769-86064988-2802
  • Fax : 86-769-86064958
  • Address : Guangdong,Dongguan,No.74 ZhongNanBei Road, Shangsha Village, Chang'an Town,Dongguan,Guangdong
  • Country/Region : China
  • Zip : 523857

8Pin Lightning to USB Cable for iPhone 5 Cable

8Pin Lightning to USB Cable for iPhone 5 Cable
Product Detailed
Lightning 8pin to USB 2.0 data Charge Cable 1.charging and Sync Data 2.Length:1m 3.Read to ship 4.Color is Black&White

1. Scope:This specification is designated Performance, Tests and Quality requirements for the 3DA series conn. Which is USB A type connector.

2. Design and ConstructionProduct shall be conformed to the design, Construction and physical dimensions shown As product drawing

3. Rating:Current :1.0AOperating temperature: -25°C~+85°C

Over mold:PVC 80Pa ,UL94V-0 Black;
Pre mold:PE Low Density;
Contact:Copper Alloy;
Insertion Force:35 N Max;
Withdraw Force:10 N Min.

4.Description:

100% brand new, high quality

Connect your iPhone or iPod to any computer or Apple Dock to charge and sync

Transfer music and pictures, or give your device some extra juice

Charge your iphone or ipod when plug into the computer

Compatible with Apple iPhone 5 & iPod Touch 5th Generation & iPod Nano 7th Generation & New iPad Mini

Unbranded /Generic  

1. Lightning to USB cable for iPhone5
2.Length as customized.
3.standard USB cable
4.Data and audio transfer rates with low noise.
5.Plug & Play compatible
6.Compatible with MAC and windows
7.Metallic braid & Mylar foil shielding to reduce EM/RF interference
8.Twisted pair wire construction for consistent data transmission
9.UL Listed - UL2725

 5. Examination of product

ITEMTEST DESCRIPTIONREQUIREMENTPROCEDURE
5.1Visual InspectionThe inspection resultsshould be compliant with theindividual specifi-cationBefore the qualification test, all thesecomponents shall be examined the features,Construction as per applicable specification anddocuments.

6. Electrical Performance

ITEMTEST DESCRIPTIONREQUIREMENTPROCEDURE
6.1Contact ResistanceInitial:30m ohms MAXAfter test:50mohms MAXThe mated test specimen shall be conductedusing open circuit voltage 20mV and the testcurrent shall not be higher than 10mA
6.2Insulation Resistance1000 Mohms minimum(unmated)Using DC 500V+/-15V for one minute testthe Insulation Resistance between adjacentcontacts.
6.3Dielectric withstandingVoltageAC 500V for one minuteNo flashover or insulationbreak-downUsing AC 500V AC RMS for one Minute totest between adjacent contacts.

7. Physical Performance

ITEMTEST DESCRIPTIONREQUIREMENTPROCEDURE
7.1Mating & UnmatingEach specimen need to berecorded three peak force ofthe mating & unmatingmovementsMating Force:3.5Kgf MAXUnmating Force:1.05KgfMIN1.RS-364-13/1.MIL-STD-1344A2013.1
7.2DurabilityAfter 1500 times ofdurability test theconnectors shall be noevidence of mechanical orelectric defects , and shallmeet the requirements ofconnector using.The mated test specimen are matedunmated 1500 cycles at a rate of 250cycles per hour

8. Enviroment Performace

ITEMTEST DESCRIPTIONREQUIREMENTPROCEDURE
8.1Solder abilityMore than 95% ofimmersed area shall becovered with solderImmersed the contact of connector intothe molten-Tin oven as below condition,-Temp.of Tin Oven:245°C-Speed: 25.4mm/sec-Time: 5seconds
8.2Salt SprayAfter the Salt Spray test ,The connectors shall notevident corrosion

The connector specimen are testing withthe 5%salt water (NaC1)

6.5-7.2PH,Temperature 35°C, for 48Hours test

8.3HumidityAfter the Duration of240 hours in cyclingTempera-ture-Humiditytest then the InsulationResistance should behigher than 1000MΩ  The mated test specimen are tested withthe duration of 240 hours in cyclingTemperature-Humidity test, thenmeasure the insulation resistance

9.product photos and drawing

8Pin Lightning to USB Cable for iPhone 5 Cable



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.