- Contact Person : Mr. Lee Qiueen
- Company Name : Dongguan City Lang Jun Hardware Electronics Co., Ltd.
- Tel : 86-769-86064988-2802
- Fax : 86-769-86064958
- Address : Guangdong,Dongguan,No.74 ZhongNanBei Road, Shangsha Village, Chang'an Town,Dongguan,Guangdong
- Country/Region : China
- Zip : 523857
Related Product Searches:8Pin Lightning to USB Cable,High Quality,8Pin Lightning to USB Cable, iphone 5 cable data cable,Lightning 8pin to USB 2.0 data Charge Cable
1. Scope:This specification is designated Performance, Tests and Quality requirements for the 3DA series conn. Which is USB A type connector.
2. Design and ConstructionProduct shall be conformed to the design, Construction and physical dimensions shown As product drawing
3. Rating:Current :1.0AOperating temperature: -25°C~+85°C
Over mold: | PVC 80Pa ,UL94V-0 Black; |
Pre mold: | PE Low Density; |
Contact: | Copper Alloy; |
Insertion Force: | 35 N Max; |
Withdraw Force: | 10 N Min. |
4.Description:
100% brand new, high quality
Connect your iPhone or iPod to any computer or Apple Dock to charge and sync
Transfer music and pictures, or give your device some extra juice
Charge your iphone or ipod when plug into the computer
Compatible with Apple iPhone 5 & iPod Touch 5th Generation & iPod Nano 7th Generation & New iPad Mini
Unbranded /Generic
1. Lightning to USB cable for iPhone5 |
2.Length as customized. |
3.standard USB cable |
4.Data and audio transfer rates with low noise. |
5.Plug & Play compatible |
6.Compatible with MAC and windows |
7.Metallic braid & Mylar foil shielding to reduce EM/RF interference |
8.Twisted pair wire construction for consistent data transmission |
9.UL Listed - UL2725 |
5. Examination of product
ITEM | TEST DESCRIPTION | REQUIREMENT | PROCEDURE |
5.1 | Visual Inspection | The inspection resultsshould be compliant with theindividual specifi-cation | Before the qualification test, all thesecomponents shall be examined the features,Construction as per applicable specification anddocuments. |
6. Electrical Performance
ITEM | TEST DESCRIPTION | REQUIREMENT | PROCEDURE |
6.1 | Contact Resistance | Initial:30m ohms MAXAfter test:50mohms MAX | The mated test specimen shall be conductedusing open circuit voltage 20mV and the testcurrent shall not be higher than 10mA |
6.2 | Insulation Resistance | 1000 Mohms minimum(unmated) | Using DC 500V+/-15V for one minute testthe Insulation Resistance between adjacentcontacts. |
6.3 | Dielectric withstandingVoltage | AC 500V for one minuteNo flashover or insulationbreak-down | Using AC 500V AC RMS for one Minute totest between adjacent contacts. |
7. Physical Performance
ITEM | TEST DESCRIPTION | REQUIREMENT | PROCEDURE |
7.1 | Mating & Unmating | Each specimen need to berecorded three peak force ofthe mating & unmatingmovementsMating Force:3.5Kgf MAXUnmating Force:1.05KgfMIN | 1.RS-364-13/1.MIL-STD-1344A2013.1 |
7.2 | Durability | After 1500 times ofdurability test theconnectors shall be noevidence of mechanical orelectric defects , and shallmeet the requirements ofconnector using. | The mated test specimen are matedunmated 1500 cycles at a rate of 250cycles per hour |
8. Enviroment Performace
ITEM | TEST DESCRIPTION | REQUIREMENT | PROCEDURE |
8.1 | Solder ability | More than 95% ofimmersed area shall becovered with solder | Immersed the contact of connector intothe molten-Tin oven as below condition,-Temp.of Tin Oven:245°C-Speed: 25.4mm/sec-Time: 5seconds |
8.2 | Salt Spray | After the Salt Spray test ,The connectors shall notevident corrosion | The connector specimen are testing withthe 5%salt water (NaC1) 6.5-7.2PH,Temperature 35°C, for 48Hours test |
8.3 | Humidity | After the Duration of240 hours in cyclingTempera-ture-Humiditytest then the InsulationResistance should behigher than 1000MΩ | The mated test specimen are tested withthe duration of 240 hours in cyclingTemperature-Humidity test, thenmeasure the insulation resistance |
9.product photos and drawing
8Pin Lightning to USB Cable